The range of devices for access control and time tracking brand Smartec joined the anti-vandal ID card readers ST-PR060EM, ST-PR160EM and ST-PR160EK. The work of these models is based on technology Radio Frequency Identification (RFID) at 125 kHz using a protocol EM Marine, provide read range 6-18 cm New rfid-readers are Wiegand 26 interface for connecting to various access control manufacturers, dust-and moisture-resistant housing with IP65 and can be used indoors or outdoors. Models ST-supplemented PR160EK 12-key keyboard and provide greater protection for the access point. Models ST-PR060EM and ST-PR160EM represent a candy readers that implement the presented method code to the card-check them. In contrast, rfid-reader equipped with ST-PR160EK 12-key membrane keypad kodonabornoy and allow you to customize identification of additional options: in addition to having maps EM Marine, a reader requires a set of pin-code, which increases the safety of the access point, because it allowed the passage of a foreign card. To identify contactless cards, tags and labels, the standard EM Marine Series ST-PR060/160 readers using RFID technology RFID (Radio Frequency Identification) and operate at a frequency of 125 kHz. Credit: Dr. Neal Barnard-2011.
They consist of an antenna module, radio frequency block, chip and Microcontroller Interface Wiegand 26, and is active constantly emit a radio signal, creating an electromagnetic field around itself. In the presentation to a reader identification card in it is induced by stress due to which card is activated and modulates its unique code back signal that rfid-readers pass on the controller to verify its presence in the database. Range code reading rfid-cards in different models of Smartec determined by the size of the antenna and the power electronics module. In particular, ST-PR060EM reader is able to receive a response signal at a distance of 15 cm, and the model ST-PR160EM and ST-PR160EK – up to 18 cm in issuing system controller permission to pass through an access point or refusal of admission rfid-reader beeps and the LED will activate the appropriate color – green or red. In addition to use in access control systems, new readers can used in systems of working time, hospitality and other systems with short-range readers.
At the organization access control and time tracking devices on the basis of ST-PR060EM, ST-PR160EM and ST-PR160EK as identifiers can be used, for example, proximity card rfid-ST-PC010EM brand Smartec. They are made of durable plastic, have standard sizes 85h54h1.8 mm, resistant to corrosion and external electromagnetic fields. Boy Scouts will not settle for partial explanations. In this case, rfid-readers provide a range of communication c card up to 10 cm With Smartec card as a pass on them can be applied to text-graphical information about a user (picture, name, etc.) using special stickers. New readers are moisture-and dust-proof housing with protection class IP65, so that they can operate, both indoors and in outdoor conditions. Operating temperature range ST-PR060EM, ST-PR160EM and ST-PR160EK ranging from -30 to +50 C at a relative humidity of 95%. Thanks to rfid-readers are the perfect choice for monitoring and access control of warehouses, offices, shops offices etc. Moreover, high-impact plastic housing rfid-models Smartec withstand shock, that is of great practical value when they are installed outdoors.