Radiators in heating systems. Heating system – a closed network, which includes the boiler, pipes and heating appliances. In the guts of the system is filled with sparse heat conductor. In the role of the heat conductor can fluid consumed, and still others, the hot fluid or antifreeze. Boiler – a special unit of blood supply of the heating system where hot heat carrier. From this place krugovraschatelny pump on the system channels giving water or a substitute for heating devices (batteries) are the same, in other words, and give warmth to the huge house.
These are the main parts of heating circuit. Its stable functioning of the guarantee and even other small but necessary mechanisms. Tank for the expansion needed to fill the increasing temperature of the liquid in the networks of heating systems used fittings, in addition, the circuit is provided dampers, and many others. Radiators have become an important part of the heating circuit. Besides the fact that the parameters of the radiator is dependent on heating in rooms, in an aesthetic sense radiators – face the heating system.
Today's radiators are made of different alloys, they acquire a variety of shapes, different design features, not remembering is that if you want you can buy or repaint the radiator installed in every color of the rainbow. Those features make radiator core fragment of the interior design of apartments. Structurally radiators have the opportunity to divide into four main categories: panel, pipe, coil and panel radiators. Coil or plate batteries are a one or a few pipes with metal plates. Air flows, running through the convector upwards, raises the temperature of the numerous hot plates. In some radiators this form provides flow control-moving air through a special valve. The system of tubular radiator is vertically raised curved metal tubes that connect the upper and lower reservoirs. This type, per kilowatt, is expensive. Revealing indicator of this group are towel. Sectional radiators consist of separate sections, parts, and produce them out of these metals as iron, steel, aluminum. There are also so-called bimetal sectional radiators – their body is created from aluminum, and the tube – made of steel. Maximum consumed in the networks of individual heating radiators association iron steel panel battery, so stopped in their characteristics with greater precision. The panel also called battery nesektsionnymi. Most often, radiators in this category are from a two welded together from sheet metal, with linear channels. In the cavity of the direct channels There is circulation of heat carrier. In order to increase the heated plane and consequently the heat transfer to the rear surface of the panel is welded steel ribs in the form of a 'P'. Iron panel radiators can be characterized by a small thermal inertia, so there is easier to measure the temperature in the room. Main pressure most of the models of radiators is limited to 9 atmospheres. A wide range makes it possible to choose the best on the characteristics of panel radiators in each place. The disadvantage of panel radiators, as well as others made of metal panels, is susceptibility to corrosion, in addition, they are distinguished as increased sensitivity to water shock and high blood pressure. For this reason, prefabricated radiators have a chance to easily apply for heating buildings and small suburban villas, but in the case of urban apartments must attentively read the manufacturer's requirements and specifications.